Beechwood Chair with Vertical Slat

A measured place for the Beechwood Chair with Vertical Slat makes the remaining furniture choices easier to judge. The use listing places this model in indoor rooms. The frame construction is wood. Seat construction can be chosen from fabric, vinyl, or wood. Its further listed features are a published load rating of 400 lb and a listed individual weight of 17 lb.

Settle a wood finish selection among 11 choices, including Mahogany, Dark Mahogany, and Cherry, the choice of Solid Wood Seat, Padded Vinyl Seat, or Padded Fabric Seat under seat type, and a solid wood seat selection among 6 choices, including Mahogany, Dark Mahogany, and Cherry before confirming the piece. Further selection fields may appear as the configuration takes shape. Its listed dimensions are 17" W x 17" D x 36" H; use them for the placement drawing. A surface near 29 to 30 inches is the dining-height reference for this chair. Check the guest's knee room below it.

Allow about 24 inches along the table for each guest, and inspect the chair position with someone seated. The guest's route out should remain open. Care should follow the materials at the seat and surface. Clean the vinyl with a mild soapy wash and a drying cloth, avoiding cleaners based on bleach or solvents. Blot wet spills from fabric straight away, and use its cleaning code when choosing further cleaning after vacuuming.

Save the configuration with its quantity so the seating plan retains the exact choice. Selected upholstery is made into the piece, so the schedule needs additional production time.